UPDATED - SECONDARY PHOSPHATE HEAVY & MAGNET RARE EARTHS
Released
Released
Announcement PDF
ASX: VTM Victory Metals Limited ACN 124 279 750
Suite 1, 295 Rokeby Road, Subiaco Western Australia 6008
Email: admin@victorymetalsaustralia.com www.victorymetalsaustralia.com Page 1 of 1
ASX RELEASE 4 AUGUST 2026
UPDATED ANNOUNCEMENT –
GLOBALLY SIGNIFICANT SECONDARY PHOSPHATE HEAVY &
MAGNET RARE EARTHS MINERALS CONFIRMED
Victory Metals Limited (ASX:VTM) (“Victory” or “the Company”) releases an updated
version of the “Globally Significant Secondary Phosphate Heavy & Magnet Rare Earths
Minerals Confirmed”, originally released on 30 July 2026.
The updated announcement has been released to include the JORC Code Table 1
information required under ASX Listing Rules 5.6 and 5.7.1 in respect of the reported
exploration results. No other material changes have been made to the announcement.
This announcement has been authorised by the Board of Victory Metals Limited.
For further information please contact:
Brendan Clark Jim Carden
CEO and Executive Director Investor and Media Relations
admin@victorymetalsaustralia.com jimc@bastionagency.com
ASX: VTM Victory Metals Limited ACN 124 279 750
Suite 1, 295 Rokeby Road, Subiaco Western Australia 6008
Email: admin@victorymetalsaustralia.com www.victorymetalsaustralia.com Page 1 of 8
GLOBALLY SIGNIFICANT SECONDARY PHOSPHATE
HEAVY & MAGNET RARE EARTHS MINERALS CONFIRMED
86% of Dy and 82% of Tb in churchite & similar group 88% of Pr and 90% of Nd in
secondary phosphate groups
Victory Metals Limited (ASX: VTM) (“Victory” or “the Company”) is pleased to announce
the results of detailed TESCAN Integrated Mineral Analyser (TIMA) characterisation of
mineral concentrate produced from the Company’s 100% owned North Stanmore Heavy
Rare Earth Project (“North Stanmore” or the “Project”) near Cue, Western Australia.
The TIMA summary classified 5.93 mass% of the analysed concentrate as secondary rare
earth phosphate groups, comprising 2.11% churchite and 3.82% rhabdophane. Indicative
deportment results show that these secondary phosphate groups host most of the target
rare earth value, including the heavy rare earths dysprosium and terbium and the magnet
rare earths neodymium and praseodymium.
HIGHLIGHTS
• Defence critical heavy rare earths 86% of Dysprosium (Dy), 82% of Terbium
(Tb) and 96% of Yttrium (Y) report to the combined churchite, rhabdophane and
associated interphase secondary phosphate groups.
• Key magnet light rare earths being 88% of Praseodymium (Pr) and 91% of
Neodymium (Nd) report to the same combined secondary phosphate system.
• Distinctive dual host mineralogy of Churchite and similar is the largest
individual host of Dy and Tb, while rhabdophane and similar is the largest
individual host of Nd and Pr.
• Broad strategic rare earth exposure with the secondary phosphate system
hosts the substantial majority of five critical defence and permanent magnet
rare earths Dy, Tb, Y, Nd and Pr rather than relying on a single commodity.
• Limited primary rare earth minerals monazite and xenotime groups together
comprise only 1.13 mass% of the analysed concentrate, reinforcing the
distinctive weathered mineralogy at North Stanmore.
• Potential processing differentiation unlike primary monazite and xenotime
dominated systems that commonly require mineral cracking before leaching,
North Stanmore’s target rare earth value is predominantly associated with
hydrated secondary phosphate groups formed through natural weathering.
ASX RELEASE 4 AUGUST 2026
Victory Metals Chief Executive Officer and Executive Director Brendan Clark
commented: “These results represent an important advancement for North Stanmore and
reinforce the strategic significance of the Project. The mineralogy demonstrates that North
Stanmore combines high value heavy rare earths, including Dysprosium and Terbium, with
the key magnet light rare earths Neodymium and Praseodymium. Importantly, these
elements are predominantly associated with secondary phosphate mineral groups.
“This is a powerful point of differentiation from primary xenotime and monazite dominated
systems. Natural weathering has already transformed the original mineral assemblage and
redistributed the rare earth value into hydrated secondary phosphates. This mineralogical
advantage supports our flotation led beneficiation and selective leaching strategy, subject
to ongoing testwork, and provides a strong technical platform to advance the Pre Feasibility
Study and position North Stanmore as a potential long-term supplier to diversified Western
rare earth supply chains.”
Secondary Phosphates Host Heavy and Magnet Rare Earths
The TIMA study was carried out by ALS Metallurgy in Balcatta, Western Australia, on a
mineral concentrate produced from Victory’s pilot plant using a composite of 33 samples
from 18 drill hole locations (refer to Tables 2 and 3). The study classified the concentrate into
mineral groups and calculated indicative elemental deportment across those groups.
The ALS classification identifies churchite and similar and rhabdophane and similar as the
principal secondary rare earth phosphate groups. Churchite is a hydrated rare earth
phosphate, while rhabdophane is a hydrated light rare earth phosphate group. The report
states that the classification of rare earth phosphates and interphases is indicative and
recommends LA-ICP-MS analysis to improve the compositions assigned to each phase.
This mineralogical distribution differentiates the analysed concentrate from a system
dominated by primary monazite or xenotime. In the TIMA summary, monazite and similar
comprises only 0.91 mass% and xenotime and similar comprises 0.22 mass%, compared
with 5.93 mass% for the combined secondary rare earth phosphate groups.
Why North Stanmore Is Distinct from Primary Xenotime and Monazite Systems
Primary xenotime and monazite are anhydrous crystalline rare earth phosphates formed
within hard rock mineral systems. Their stable phosphate lattices are resistant to dissolution
and, in conventional processing, generally require fine grinding followed by high
temperature acid baking, caustic conversion or another mineral cracking step before the
rare earth elements can be leached.
North Stanmore presents a fundamentally different mineralogical history. Prolonged
weathering has redistributed much of the target rare earth value into hydrated secondary
phosphate groups. In the analysed concentrate, these secondary groups comprise 5.93
mass%, compared with only 1.13 mass% for the combined monazite and xenotime type
groups.
This is technically distinctive because both the high value heavy rare earths and the key
magnet rare earths occur predominantly within the same secondary phosphate
assemblage, rather than being predominantly hosted by separate primary xenotime- and
monazite type mineral populations.
The concentration of rare earths into discrete secondary phosphate groups support a wet
screening and flotation led beneficiation route ahead of selective hydrometallurgical
treatment.
Table 1: TIMA elemental deportment by mineral group (%) for the analysed C2 concentrate.
Secondary Phosphate Mineral System
The analysed concentrate contains 2.11 mass% churchite and similar and 3.82 mass%
rhabdophane and similar, for a combined 5.93 mass% secondary rare earth phosphate
component.
The deportment pattern indicates that weathering and reprecipitation have redistributed
rare earth elements from primary minerals into hydrated secondary phosphate phases
within the North Stanmore regolith. This interpretation is consistent with the dominance
of secondary phosphate groups over primary monazite- and xenotime-type groups in the
analysed concentrate.
The significance is the value hosted by the secondary phosphate system being the
churchite and similar group dominates Dy and Tb deportment, while the combined
churchite/rhabdophane groups host most of the Pr and Nd deportment.
Deportment to Secondary Phosphates
The TIMA summary indicates that 88% of Pr and 90% of Nd report to the combined
secondary phosphate groups.
The churchite and similar group accounts for 86% of Dysprosium and 82% of Terbium in the
TIMA summary. The same group hosts 90% of Yttrium, Only approximately 2.5% of Dy and
Tb reports to xenotime and similar, with no Dy or Tb assigned to monazite and similar in
the summary table.
These deportment results are indicative mineralogical estimates. The report notes a high
degree of uncertainty for Pr and Nd and a very high degree of uncertainty for Tb and Dy.
The Company will use further analytical and metallurgical work to refine the phase
compositions and confirm their processing response.
Favourable Gangue Mineralogy
The TIMA results also provide information on minerals that do not carry the target rare earth
value. Calcium is predominantly associated with feldspar rather than free calcite, dolomite
or other rapidly reactive carbonate minerals.
This distribution is favourable for downstream processing because free carbonate gangue
can consume acid without recovering additional rare earth value. Final acid consumption,
impurity loading and solution management requirements remain subject to
representative metallurgical variability testing and process design.
Wet Screening and Flotation Led Beneficiation
North Stanmore’s proposed front end flowsheet uses wet screening rather than
conventional hard rock crushing and grinding. The concentration of target rare earths into
discrete phosphate mineral groups provides a basis for continued selective reagent
conditioning and flotation testwork, with the objective of rejecting quartz, feldspar and clay
gangue before hydrometallurgical treatment.
Upgrading the rare earth-bearing minerals into a smaller mass fraction has the potential
to reduce the material requiring leaching, solid-liquid separation, solution purification and
residue management. The TIMA findings provide a mineralogical explanation for the
beneficiation response currently being evaluated at Victory’s pilot plant.
Downstream Testwork Implications
The secondary phosphate deportment provides a mineralogical basis for continued
hydrometallurgical evaluation of the concentrate. The TIMA study does not, by itself,
establish leach recovery, reagent consumption or final process conditions; these remain
subject to ongoing testwork and the Pre-Feasibility Study.
Victory’s metallurgical program is therefore focused on confirming how the secondary
phosphate-rich concentrate responds to selective leaching and impurity removal under
representative operating conditions.
Any potential processing benefits remain subject to completion of the Pre-Feasibility Study,
representative variability testing, integrated mass-balance calculations and final
engineering design.
This announcement has been authorised by the Board of Victory Metals Limited.
For further information please contact:
Brendan Clark Jim Carden
CEO and Executive Director Investor and Media Relations
admin@victorymetalsaustralia.com jimc@bastionagency.com
Victory Metals Limited
Victory is dedicated to the exploration and development of its flagship North Stanmore
Heavy Rare Earth Elements and critical minerals project in the Cue region of Western
Australia. The Company is advancing the Project to evaluate its potential as a future supplier
of critical rare earth materials.
In August 2025, Victory announced a Mineral Resource Estimate for North Stanmore
totalling 320.6 million tonnes, including 176.5 million tonnes in the Indicated category. The
Mineral Resource is heavy rare earth-enriched, with an overall HREO/TREO ratio of 38%.
North Stanmore Flotation Concentrate and Oxide Grades
Refer to the ASX announcement titled “Victory Commissions Pilot Plant That Delivers 7.1% TREO Concentrate
and 40% HREE Ratio”, dated 17 June 2026.
North Stanmore Mineral Resource Estimate
CLASSIFICATION
MRE
TONNES (t)
TREOSc
(ppm)
TREO
(ppm)
HREO
(ppm)
LREO
(ppm)
HREO/TREO
(%)
Sc₂O₃
(ppm)
Ga₂O₃
(ppm)
INDICATED 176,522,000 532 505 190 316 39 26 26
INFERRED 144,118,000 484 463 166 297 37 21 25
TOTAL 320,640,000 510 486 179 307 38 24 26
Table 1: North Stanmore August 2025 MRE (≥330 ppm TREO + Sc₂O₃ cut-off grade)
Numbers are rounded to reflect the appropriate level of precision for an estimate and may not sum due to
rounding.
Forward-looking statements
This announcement contains “forward-looking statements”. All statements other than those
of historical facts included in this announcement are forward-looking statements. Where a
company expresses or implies an expectation or belief as to future events or results, such
expectation or belief is expressed in good faith and believed to have a reasonable basis.
However, forward-looking statements are subject to risks, uncertainties and other factors,
which could cause actual results to differ materially from future results expressed, projected
or implied by such forward-looking statements. Such risks include, but are not limited to,
metals price volatility, currency fluctuations, increased production costs and variances in ore
grade or recovery rates from those assumed in mining plans, as well as political and
operational risks and governmental regulation and judicial outcomes. Victory undertakes no
obligation to release publicly any revisions to any “forward-looking” statement.
Competent Person Statement – Professor Ken Collerson
Statements relating to exploration results, metallurgical results and scientific evaluation
are based on information compiled and evaluated by Emeritus Professor Ken Collerson,
PhD, Principal of KDC Geo Consulting, Director of Victory Metals Limited and Fellow of the
Australasian Institute of Mining and Metallurgy (AusIMM No. 100125). Professor Collerson is
a geochemist/geologist with sufficient relevant experience in the reported rare earth and
critical metal mineralisation to qualify as a Competent Person under the Australasian Code
for Reporting of Exploration Results, Mineral Resources and Ore Reserves (JORC Code 2012).
Professor Collerson consents to the inclusion of this information in the form and context in
which it appears.
Table 2 — Feed sample assay results (ppm)
Hole
ID
Sample From To La₂O₃ CeO₂ Pr₆O₁₁ Nd₂O₃ Sm₂O₃ Eu₂O₃ Gd₂O₃ Tb₄O₇ Dy₂O₃ Ho₂O₃ Er₂O₃ Tm₂O₃ Yb₂O₃ Lu₂O₃ Y₂O₃ TREO HREO:TREO
IF019 3.00E+05 21 22 210 178 56 232 51 15 50 7 38 7 19 3 16 2 218 1103 0.34
IF019 3.00E+05 22 23 95 79 26 108 23 8 27 4 25 5 15 2 14 2 167 601 0.45
IF036 3.00E+05 44 45 564 646 138 574 128 37 155 23 151 34 102 13 81 11 1218 3874 0.47
IF128 3.00E+05 21 22 84 311 24 104 23 7 23 4 26 6 16 2 16 3 135 783 0.3
IF144 3.00E+05 23 24 119 238 30 115 27 5 27 5 31 6 20 3 18 3 189 832 0.37
IF144 3.00E+05 24 25 87 175 22 85 22 4 24 4 27 6 17 2 17 2 173 666 0.41
IF144 3.00E+05 29 30 97 177 23 95 22 4 19 3 20 4 12 2 11 2 126 618 0.33
IF149 3.00E+05 17 18 78 230 27 125 34 11 48 8 55 12 34 5 32 5 405 1108 0.55
IF150 3.00E+05 17 18 110 220 29 109 26 3 27 4 24 5 17 2 16 2 176 770 0.36
IF151 3.00E+05 14 15 86 92 23 96 28 12 45 8 53 13 41 6 38 6 396 941 0.66
IF153 3.00E+05 45 46 109 42 27 111 24 7 27 5 30 7 20 3 20 3 179 616 0.49
IF180 3.00E+05 18 19 174 356 42 164 38 6 35 6 37 8 23 4 24 4 231 1151 0.33
IF180 3.00E+05 19 20 132 262 34 125 29 5 23 4 25 5 16 3 17 3 160 842 0.31
IF180 3.00E+05 20 21 130 247 33 123 29 6 26 5 32 7 21 3 21 3 218 902 0.38
IF180 3.00E+05 21 22 89 176 22 84 20 4 18 3 21 4 13 2 14 2 135 607 0.36
IF180 3.00E+05 23 24 109 239 27 103 26 5 24 4 25 5 16 2 16 2 150 754 0.33
IF180 3.00E+05 24 25 147 269 36 142 33 7 31 5 31 6 17 3 18 3 174 922 0.32
IF182 3.00E+05 24 25 99 214 22 85 18 5 19 3 21 5 16 2 16 3 166 692 0.37
IF184 3.00E+05 45 46 246 94 64 243 56 17 51 9 48 9 24 3 23 3 217 1106 0.36
IF188 3.00E+05 30 31 259 105 49 177 40 11 41 6 38 7 20 3 18 3 197 973 0.35
IF190 3.00E+05 17 18 164 295 45 171 37 8 31 5 29 6 18 3 19 3 182 1014 0.3
IF190 3.00E+05 18 19 361 661 79 313 64 14 73 12 76 16 49 7 45 7 522 2299 0.36
IF193 3.00E+05 27 28 124 193 27 102 22 5 21 3 22 5 14 2 14 2 127 682 0.31
IF196 3.00E+05 24 25 45 361 13 55 15 4 18 4 28 6 21 3 21 3 203 800 0.39
IF197 3.00E+05 27 28 386 720 109 449 91 20 77 12 67 13 35 5 34 5 325 2348 0.25
IF197 3.00E+05 28 29 298 146 79 336 73 18 84 15 89 19 54 8 47 7 571 1843 0.49
IF198 3.00E+05 31 32 427 556 119 456 87 21 79 13 83 18 54 8 54 8 593 2576 0.36
IF198 3.00E+05 32 33 347 226 83 349 75 19 78 11 67 13 36 5 32 5 366 1711 0.37
IF198 3.00E+05 34 35 265 412 74 295 61 15 55 9 52 10 29 4 27 4 286 1595 0.31
IF198 3.00E+05 35 36 314 405 83 339 69 16 66 10 58 11 33 5 30 4 330 1774 0.32
IF198 3.00E+05 36 37 202 238 53 211 42 10 42 7 43 9 27 4 24 4 277 1193 0.37
IF200 3.00E+05 23 24 116 353 25 93 23 6 27 5 32 7 19 3 19 3 185 913 0.33
IF200 3.00E+05 24 25 114 146 22 84 20 5 22 3 23 5 15 2 14 2 159 637 0.39
ASX: VTM Victory Metals Limited ACN 124 279 750
Suite 1, 295 Rokeby Road, Subiaco Western Australia 6008
Email: admin@victorymetalsaustralia.com www.victorymetalsaustralia.com Page 8 of 8
Table 3 — Feed sample drill hole collar locations
Notes: Coordinates in metres, MGA Zone 50. RL is topographic surface elevation (m). TREO = total rare earth oxides (including
yttrium); HREO = heavy rare earth oxides. Assays are reported on individual one-metre samples.
HoleID
Easting
(mE)
Northing
(mN)
RL
(m)
No.
samples
Sampled
interval (m)
IF019 588198 6975138 408 4 20–24
IF036 589898 6975130 385 2 43–45
IF128 589189 6973716 412 1 21–22
IF144 586112 6973316 407 3 23–30
IF149 586597 6973309 414 2 17–20
IF150 586695 6973312 414 1 17–18
IF151 586815 6973313 417 1 14–15
IF153 587014 6973318 386 3 45–57
IF180 586377 6972910 414 8 18–29
IF182 586602 6972908 410 3 22–25
IF184 586786 6972917 387 1 45–46
IF188 587201 6972925 403 1 30–31
IF190 588596 6972910 418 3 17–20
IF193 588910 6972924 408 2 27–29
IF196 589204 6972903 411 1 24–25
IF197 589301 6972907 408 2 27–29
IF198 589397 6972907 404 6 31–38
IF200 589600 6972906 412 2 23–25
Page 1 of 14
APPENDIX 1: 2012 JORC CODE
Table 1: JORC Code
Section 1: Sampling Techniques and Data
Criteria
JORC Code
explanation
Commentary
Sampling
techniques
• Nature and quality of
sampling (e.g. cut
channels, random
chips, or specific
specialised industry
standard
measurement tools
appropriate to the
minerals under
investigation, such
as downhole gamma
sondes, or handheld
XRF instruments,
etc.). These
examples should not
be taken as limiting
the broad meaning
of sampling.
• Include reference to
measures taken to
ensure sample
representivity and
the appropriate
calibration of any
measurement tools
or systems used.
• Aspects of the
determination of
mineralisation that
are Material to the
Public Report. In
cases where
‘industry standard’
work has been done
this would be
relatively simple
(e.g. ‘reverse
circulation drilling
was used to obtain
1 m samples from
which 3 kg was
pulverised to
produce a 30 g
charge for fire
assay’). In other
cases, more
explanation may be
required, such as
where there is
coarse gold that has
inherent sampling
• (AC) Air core drillholes were drilled vertically and spaced 100m apart along
200m - 400m spaced drill lines.
• (AC) drilling samples were collected as 1-m samples from the rig cyclone. Each
sample was placed into large green drill bags (900mmx600mm) for temporary
storage onsite.
• Each sample was then split using a 3-tier (87.5% - 12.5%) splitter and the split
sample was placed into calico sample bags for transport to Perth.
• Sample weights and recoveries were recorded on site and weighed 1.5 - 2.5
kg depending on the sample recovery from the drill hole. The mean bulk
sample weight was 8.45kg.
• A commercial transport company was used to transport the bags to the
Victory warehouse in Perth.
• A handheld pXRF analyzer (Olympus Vanta) was used to determine
anomalous REO (Rare earth element) geochemistry (La, Ce, Pr, Nd and Y) from
the 1-m sample piles. pXRF reading times were 45 secs over 3 cycles for
multielement and REO assays. These results are not considered dependable
without calibration using chemical analysis from an accredited laboratory.
However, their integrity was checked using Certified REO -bearing
geochemical standards.
• The handheld pXRF is used as a guide to the relative presence or absence of
certain elements, including REOs vectors (La, Ce, Pr, Nd and Y) to help direct
the sampling program. Anomalous 1m samples were then transported to the
assay lab for analysis by Victory personnel. REO anomalism thresholds are
determined by VTM technical lead based on historical data analysis. Currently
the anomaly threshold is plus 30ppm Yttrium.
• Victory attended North Stanmore to collect the green sample bag which was
transported by Victory to Victory’s secure warehouse in Perth.
• Measures taken to ensure sample representivity included regular cleaning of
the rig between drill holes using compressed air and weighing the bulk
sample to ensure reasonable sample return against an expected target
weight.
• RC drill samples were collected as 1-m samples from the rig cyclone and
placed on top of black plastic, which was laid on the natural ground surface to
prevent contamination, in separate piles and in orderly rows. A hand-held
trowel was used to collect 4-m composite samples from the 1-m piles.
Compositing did not account for lithology changes. These composite samples
weighed between 2 and 3 kg.
Page 2 of 14
Criteria
JORC Code
explanation
Commentary
problems. Unusual
commodities or
mineralisation types
(e.g. submarine
nodules) may
warrant disclosure of
detailed information
Drilling
techniques
• Drill type (e.g. core,
reverse circulation,
open-hole hammer,
rotary air blast,
auger, Bangka,
sonic, etc.) and
details (e.g. core
diameter, triple or
standard tube,
depth of diamond
tails, face-sampling
bit or other type,
whether core is
oriented and if so,
by what method,
etc.).
• (AC) drilling uses a three bladed steel or tungsten drill bit to penetrate the
weathered layer of loose soil and rock fragments. The drill rods are hollow
and have an inner tube with an outer barrel (similar to RC drilling).
• (AC) drilling uses small compressors (750 cfm/250 psi) to drill holes into the
weathered layer of loose soil and fragments of rock.
• (RC) Drilling used a 5½” face sampling hammer with 1,350cfm/500 psi
onboard compressor, which was occasionally supplemented with an
additional booster (2,100cfm/1,000 psi).
• After drilling is complete, an injection of compressed air is unleashed into the
space between the inner tube and the drill rods inside wall, which flushes the
cuttings up and out of the drill hole through the rod’s inner tube, resulting in
less chance of cross-contamination.
• (AC) Drilling was conducted by Bostech Drilling for the 63 drillhole
programme.
• The drill rigs were inspected daily by VTM personnel for safety and rig hygiene
Drill sample
recovery
• Method of recording
and assessing core
and chip sample
recoveries and
results assessed.
• Measures taken to
maximise sample
recovery and ensure
representative
nature of the
samples.
• Whether a
relationship exists
between sample
recovery and grade
and whether sample
bias may have
occurred due to
preferential
loss/gain of
fine/coarse material.
• The majority of samples were dry, where excessive water flows were
encountered during drilling the sample recovery was variable. The depth that
water was encountered was recorded in the database.
• Representative percussion drillhole samples were collected as 1-metre
intervals, with corresponding chips placed into chip trays and kept for
reference at VTM’s facilities.
• Measures taken to ensure sample representivity and recovery included
regular cleaning of the rig between drill holes using compressed air and
weighing the bulk sample to ensure reasonable sample return against an
expected target weight.
Logging
• Whether core and
chip samples have
been geologically
and geotechnically
logged to a level of
detail to support
appropriate Mineral
Resource estimation,
mining studies and
metallurgical
studies.
• All percussion samples in the chip trays were lithologically logged using
standard industry logging software on a notebook computer.
• All (AC) samples have been logged for lithology, alteration, quartz veins,
colour, fabrics.
• All (AC) samples have been analysed by a handheld pXRF.
• All samples were subjected to a NIR spectrometer for the identification of
minerals and the variations in mineral chemistry to detect alteration
assemblages and regolith profiles.
• All geological information noted above has been reviewed by a competent
person as recognised by JORC.
• Whether logging is
qualitative or
quantitative in
nature. Core (or
• Logging is qualitative in nature.
• (AC) samples have been photographed.
Page 3 of 14
Criteria
JORC Code
explanation
Commentary
costean, channel,
etc.) photography.
• The total length and
percentage of the
relevant
intersections
logged.
• 90% of the sample intervals were logged.
Subsamplin
g techniques
and sample
preparation
• If core, whether cut
or sawn and whether
quarter, half or all
core taken.
• Diamond drilling was PQ core.
• Half core samples were taken, with the exception of when twin samples were
collected and then the samples were quarter core.
• If non-core, whether
riffled, tube
sampled, rotary split,
etc. and whether
sampled wet or dry.
• Air core and RC sampling was undertaken on 1m intervals using a Meztke
Static Cone splitter.
• Samples from the cyclone were placed into green drill bags and were laid out
in orderly rows on the ground.
• Using a hand-held trowel, 1m samples were collected from the one-metre
drill bags after splitting of the sample.
• These samples were placed into calico bags and weighed between 1.5 and 2.5
kgs.
• For all sample types,
the nature, quality
and appropriateness
of the sample
preparation
technique.
• Samples were assayed by ALS Laboratories in Perth, a NATA Accredited
Testing Laboratory. The assay methods used include:
o ME-4ACD81: Four acid digestion followed by ICP-AES
measurement
o ME-MS81: Lithium borate fusion followed by acid dissolution and
ICPMS measurement
o ME-ICP06: Fusion decomposition followed by ICP-OES
measurement
• REOs were all analysed by ME-MS81 (four acid digestion followed by ICPMS
measurement) with results returned in their elemental form. Elements were
then converted to oxides using the appropriate stoichiometric conversion
factors.
• Base metals are assayed by ME-ICP06: Fusion decomposition.
• Non-ferrous metals are assayed by ME-4ACD81: Four acid digestion.
• Quality control
procedures adopted
for all subsampling
stages to maximise
representivity of
samples.
• Using a riffle splitter, 1m composite samples were collected from the
individual sample bags.
• Quality control of the assaying comprised the collection of a bulk repeat
sample every hole, along with the regular insertion of industry (OREAS)
standards (certified reference material) every 20 samples and blanks (beach
sand) every 50 samples. The repeat sample was collected by passing the bulk
reject obtained from the first split stage through the riffle splitter once more.
The repeat sample is not a duplicate.
• Measures taken to
ensure that the
sampling is
representative of the
in-situ material
collected, including
for instance results
for field
duplicate/second-
half sampling.
• Fourteen twin samples of quarter core (diamond PQ) were compared to the
original sample for each REO element and results were found to be
acceptable to the CP.
• Whether sample
sizes are appropriate
to the grain size of
the material being
sampled.
• Composite samples weighed between 1 and 2 Kg’s.
• Sample sizes are considered appropriate to the grain size of the material
being sampled.
Page 4 of 14
Criteria
JORC Code
explanation
Commentary
Quality of
assay data
and
laboratory
tests
• The nature, quality
and appropriateness
of the assaying and
laboratory
procedures used
and whether the
technique is
considered partial or
total.
• All samples were analysed in the field using a handheld Olympus Vanta XRF
unit to identify geochemical thresholds. These results are not considered
dependable without calibration using chemical analysis. They were used as a
guide to the relative presence or absence of certain elements, including REOs
to help guide the drill program and selection of samples to be submitted for
analytical analysis.
• All pXRF anomalous samples were sent to ALS Wangara in Perth for analysis.
Over time the mineralised sample criteria has evolved from an initial sampling
threshold value of La+Ce+Nd+Pr+Y > 200ppm (for the RSC MRE), to
Ce>30ppm (for the post RSC to July 2024 MRE), and most recently Y>30ppm
(POST July 2024 to July 2025 MRE).
• Samples were submitted for sample preparation and geochemical analysis by
ALS in Wangara, Perth, a NATA accredited laboratory. All samples were
crushed and pulverized to generate a pulp aliquot sample with 95% of the
aliquot sample passing 75µ (ALS methods CRU-31, PUL-31). Aliquots were
analysed using the following methods:
o Lithium borate fusion prior to acid dissolution and ICPMS (ALS
method ME-MS81, a total assay technique) for Ba, Ce, Cr, Cs, Dy,
Er, Eu, Ga, Gd, Hf, Ho, La, Lu, Nb, Nd, Pr, Rb, Sc, Sm, Sn, Sr, Ta, Tb,
Th, Ti, Tm, U, V, W, Y, Yb, and Zr.
o Lithium borate fusion prior to acid dissolution and ICPOES (ALS
method ME-ICP06, a total assay technique) for Al2O3, BaO, CaO,
Cr2O3, Fe2O3, K2O, MgO, MnO, Na2O, P2O5, SiO2, SrO, TiO2, and
Total.
o 4-acid digest and read by ICP-AES (ALS method ME-4ACD81, a
partial assay technique) for Ag, As, Cd, Co, Cu, Li, Mo, Ni, Pb, Sc, Tl,
and Zn (base metals).
o Thermogravimetric analysis to determine loss on ignition (LOI)
content.
• The sample preparation and analysis are considered appropriate for the
analytes.
• As a result of the pXRF analysis leading the selection criteria for assaying by a
laboratory, only 16,620 metres of drilling of the total 45,340 drill metres (or
37% of total metres) has been assayed.
• For geophysical
tools, spectrometers,
handheld XRF
instruments, etc., the
parameters used in
determining the
analysis including
instrument make
and model, reading
times, calibrations
factors applied and
thei
Share your feedback
Discover