VTM COMMISSIONED PILOT PLANT DELIVERS 7.1% TREO CONCENTRATE
Released
Released
Announcement PDF
ASX: VTM Victory Metals Limited ACN 124 279 750
Suite 1, 295 Rokeby Road, Subiaco Western Australia 6008
Email: admin@victorymetalsaustralia.com www.victorymetalsaustralia.com Page 1 of 35
VICTORY COMMISSIONS PILOT PLANT THAT DELIVERS
7.1% TREO CONCENTRATE AND 40% HREE RATIO
Victory Metals Limited (ASX:VTM) is pleased to announce a defining processing
milestone for its North Stanmore Project from the Company's recently
commissioned pilot plant in Perth, Western Australia, delivering a ~59x upgrade to
a ~7.1% (~71,000ppm) Total Rare Earth Oxide (TREO) concentrate from a feed grade
of 1,195 ppm comprising 40% Heavy Rare Earth Oxides1
(HREOs). The results were
derived from 65 samples, 25 drill hole locations with varying depths between 14m
to 58m. The result proves that North Stanmore's heavy rare earths can be
concentrated in a simple, continuous low-cost flotation circuit.
HIGHLIGHTS
• ~59x TREO upgrade by simple low-cost flotation from Victory’s own pilot plant.
• This result was achieved not in a single batch or sighter test, but in a
continuously fed circuit operating at approximately 12 times the scale of any
previous flotation test work on North Stanmore ore.
• The flotation route avoids high temperature, acid cracking and the associated
capital burden carried by conventional projects.
• Victory will move to produce larger volumes of its heavy rare earth enriched
concentrate for supply to potential offtake partners.
• Results feed directly into the impending Pre-Feasibility Study (PFS).
• Valuable and highly sought after heavy rare earth oxides in the concentrate
include:
Dysprosium oxide (Dy₂O₃): 2,777 ppm
Terbium oxide (Tb₄O₇): 479 ppm
Yttrium oxide (Y₂O₃): 1.77 wt%
• Extremely low activity levels of Thorium (232
Th) and Uranium (238
U) 2.35 Bq/g
and 1.47 Bq/g which indicates that the concentrate can be shipped as general
cargo.
1
HREOs include the oxides of Eu, Gd, Tb, Dy, Ho Er, Tm, Yb, Lu plus Y.
ASX RELEASE 17 JUNE 2026
Page 2 of 35
Victory Metals Chief Executive Officer and Executive Director Brendan Clark
commented: “This is the result we have been driving towards. We have now
proven, at continuous pilot scale and on our own plant commissioned right here
in Perth at our own premises, that North Stanmore's heavy rare earths can be
concentrated in a simple, conventional flotation circuit while preserving the
premium Dysprosium, Terbium and Yttrium basket that makes this deposit
strategically important. I had the pleasure of working firsthand with our technical
team to observe the process and understand its true simplicity.”
A ~59-fold upgrade from only one cleaner stage in a continuously operating circuit
is the foundation of a smaller, cheaper and faster plant and I am impressed that
we are leading the way in simplifying rare earth processing."
This floatable mineralogy and ambient temperature recovery pathway gives
North Stanmore a significant processing advantage. With few global peers that
can produce the heavy rare earths that the Western world actually needs, we are
very excited about producing product at continuous plant scale to provide quality
larger samples to our potential future offtake partners."
Figure 1. A section of Victory’s flotation pilot plant at its Perth premises.
Page 3 of 35
Concentrate Assay Results
The composite concentrate produced from the continuous flotation circuit was
assayed by ALS Laboratories in Western Australia (certificate PH261998802; rare
earths by ME-MS81h, majors by ME-ICP06, loss on ignition by ME-GRA05). The
concentrate returned a Total Rare Earth Oxide (TREO) grade of approximately 7.1%
(~71,000 ppm), with heavy rare earth oxides making up approximately 40% of the
rare earth basket anchored by the premium heavy rare earths Dysprosium,
Terbium and Yttrium. The full elemental and oxide breakdown is set out in Table 1.
The flotation feed was prepared as a composite of 65 one meter samples collected
between 14m and 58m downhole from 25 drill holes across the North Stanmore
deposit. The individual sample assay results and drill hole collar locations are set
out in Table A1 to this announcement.
Figure 2. Heavy rare earth cleaner sample (right) produced at the North Stanmore pilot plant and
(left) first rougher feed sample (Staedtler pen shown for scale).
Page 4 of 35
Oxide
Feed Ore
(ppm)2
Prelim. Final
Conc. (ppm)
Final Conc.
(wt%)
La₂O₃ 199 11,517 1.15
CeO₂ 262 14,188 1.42
Pr₆O₁₁ 43 2,730 0.27
Nd₂O₃ 177 11,582 1.16
Sm₂O₃ 38 2,447 0.24
Eu₂O₃ 9 616 0.06
Gd₂O₃ 43 2,847 0.28
Tb₄O₇ 7 479 0.05
Dy₂O₃ 45 2,777 0.28
Ho₂O₃ 9 561 0.06
Er₂O₃ 28 1,624 0.16
Tm₂O₃ 4 248 0.02
Yb₂O₃ 26 1,418 0.14
Lu₂O₃ 4 221 0.02
Y₂O₃ 301 17,652 1.77
TREYO 1,195 70,906 7.09
HREYO (ppm) 476 28,442 2.84
HREO : TREO 0.40% 0.40%
Ce/Ce* 0.63 0.57 0.57
ThO₂ (ppm) 13 578
U₃O₈ (ppm) 4 119
²³²Th activity (Bq/g) 0.05 2.35
²³⁸U activity (Bq/g) 0.04 1.47
Table 1. North Stanmore flotation concentrate, rare earth element and oxide grades.
The concentrate is enriched in secondary phosphate minerals, rhabdophane after
monazite and churchite after xenotime. It has a Ce/Ce* 3
of <<1 (0.57) indicating that
the regolith is highly oxidized. During this process, Uranium (U) and Thorium (Th)
were removed from the weathering profile resulting in exceptionally low activity
levels.
The stages of the enrichment process from the source intrusion through the
weathering oxidation induced enrichment to the final flotation enrichment is
shown in chondrite normalised4
plots (Figure 3).
2
The feed grade represents the higher-grade portion of the North Stanmore deposit that Victory’s Pre-Feasibility Study is
targeting for the first phase of mining, to exploit a greater proportion of REE in the early years of operation.
3
Ce/Ce* ratios >1 reflect the gain of Ce4+
at shallower regolith levels. Ce/Ce* ratios <1 reflect the loss of mobile Ce4+
from deeper
parts of weathering profiles that contain Ce3+.
Leachable ionic clay REE deposits all have Ce/Ce* <1. The Ce/Ce* ratio is calculated
using the following expression:
Ce/Ce* = (2*(CeN)/(LaN+PrN), where CeN, LaN and PrN are chondrite normalised values, i.e., LaN = La concentration /0.237,
CeN =Ce concentration /0.613 and PrN =Pr concentration/0.0928.
4
Chondrite normalised plots are constructed by plotting the REE concentrations (divided by their chondritic abundances) in
order of increasing atomic number. They are a standard geochemical technique to compare REE abundances as the plot
eliminates variation irregularities due to the Oddo Harkins effect, i.e., where elements with odd atomic numbers are less
Page 5 of 35
Figure 3: Chondrite Normalised REE plot showing the 3 orders-of-magnitude enrichment
from source intrusion through weathering to flotation concentrate,
in a sample of bulk saprolite ore from North Stanmore.
Victory’s Flotation Pilot Plant
The test work was completed at Victory’s own and recently commissioned pilot
plant in Perth, Western Australia which was purpose built with continuous
flotation infrastructure and now operated in-house by the Company with the result
assayed by ALS Laboratories in Western Australia. Producing this result on Victory
owned equipment, rather than at a third-party commercial facility, gives the
Company direct ownership of its processing IP and the ability to optimise and scale
its flowsheet rapidly.
Critically, this result was achieved not in a single batch or sighter test, but in a
continuously fed circuit operating at approximately 12 times the scale of previous
test work. Continuous operation evaluates the circuit under the steady-state
conditions a commercial plant will actually run under and represents a
fundamental step beyond bench scale validation. The result builds directly on
Victory’s earlier sighter flotation work, which delivered a 48x upgrade to a 5.9%
abundant than those with even atomic numbers. As a result, with the exception of Ce, Eu there should be a smooth progression
from element-to-element on chondrite normalised plots.
Page 6 of 35
TREO concentrate5
, and confirms the central thesis behind North Stanmore’s
processing advantage: that the deposit’s heavy rare earths are hosted in discrete,
well liberated secondary phosphate minerals rhabdophane and churchite that are
highly responsive to conventional froth flotation.
This mineralogy places North Stanmore in a rare position within the global rare
earth landscape, as most clay-hosted (ionic adsorption) rare earth deposits cannot
be concentrated by flotation at all: their rare earths are ionically adsorbed onto clay
surfaces and must be recovered by leaching or desorption. Most flotation-
amenable rare earth deposits, by contrast, are hard-rock monazite, xenotime or
bastnasite ores, requiring energy-intensive processing.
By upgrading feed grade approximately 59-fold and rejecting an estimated >95%
of ore mass upstream, the continuous flotation circuit points to a hydro-
metallurgical plant a fraction of the size contemplated under the Company’s initial
engineering concepts. A smaller plant means lower capital expenditure, lower
operating costs, a smaller energy and reagent footprint, and a simpler, faster path
to construction and production.
Combined with Victory’s previously reported ability to extract its premium heavy
rare earths under low acid, ambient temperature, atmospheric pressure leaching
conditions, the flowsheet avoids the high-temperature acid cracking step and the
associated capital cost, estimated at up to approximately ~A$1 billion based on
peer project capital requirements that defines conventional hard rock rare earth
development.
For Western supply chains seeking secure, non-Chinese sources of Dysprosium,
Terbium and Yttrium, North Stanmore is emerging as one of the most capital
efficient heavy rare earth development pathways currently demonstrated globally.
With the processing route now demonstrated at continuous pilot scale, Victory is
moving from proving the flowsheet to producing concentrate. Using its in-house
pilot plant, the Company intends to generate larger volumes of its heavy rare earth
enriched concentrate to support evaluation, qualification and sampling by
potential offtake partners.
5
Refer to ASX announcement on 1 April 2026 “Breakthrough Heavy Rare Earth Recovery Pathway to Production”
Page 7 of 35
The concentrate is a differentiated product. Its high heavy rare earth content
anchored by Dysprosium, Terbium and Yttrium which aligns directly with what
Western partners have indicated they are seeking: secure, non-Chinese supply
weighted toward the rare earths that are genuinely scarce and strategically critical,
rather than the lighter elements already abundant in existing supply chains. The
Company believes this positioning will support strong interest as it progresses to
offtake discussions in parallel with the PFS.
Figure 4. Heavy rare earth enriched froth sourced from clay ore at North Stanmore.
This announcement has been authorised by the Board of Victory Metals Limited.
For further information please contact:
Brendan Clark Jim Carden
CEO and Executive Director Investor and Media Relations
admin@victorymetalsaustralia.com jimc@bastionagency.com
Page 8 of 35
Victory Metals Limited
Victory is dedicated to the exploration and development of its flagship North
Stanmore Heavy Rare Earth Elements (HREE), and critical minerals project located
in the Cue Region of Western Australia. The Company is committed to advancing
this world-class project to unlock its significant potential.
In August 2025, Victory Metals announced a robust Mineral Resource Estimate
(MRE) for North Stanmore, totalling 320.6 million tonnes, with most of the resource
classified in the indicated category. This positions the North Stanmore Project as
Australia's largest indicated clay heavy rare earth resource, underscoring its pivotal
role as a future supplier of critical materials.
North Stanmore Mineral Resource Estimate
Table 1: North Stanmore August 2025 MRE (≥330ppm TREO + Sc2O3 cut-off grade)
CLASSIFICATION
MRE
TONNES
(t)
TREOSc
(ppm)
TREO
(ppm)
HREO
(ppm)
LREO
(ppm)
HREO/TREO
(%)
Sc2O3
(ppm)
Ga2O3
(ppm)
INDICATED 176,522,000 532 505 190 316 39 26 26
INFERRED 144,118,000 484 463 166 297 37 21 25
TOTAL 320,640,000 510 486 179 307 38 24 26
Numbers are rounded to reflect they are an estimate. Numbers may not sum due to rounding.
Forward-looking statements
This announcement contains “forward-looking statements”. All statements other
than those of historical facts included in this announcement are forward-looking
statements. Where a company expresses or implies an expectation or belief as to
future events or results, such expectation or belief is expressed in good faith and
believed to have a reasonable basis. However, forward-looking statements are
subject to risks, uncertainties and other factors, which could cause actual results to
differ materially from future results expressed, projected or implied by such forward-
looking statements. Such risks include, but are not limited to, metals price volatility,
currency fluctuations, increased production costs and variances in ore grade or
recovery rates from those assumed in mining plans, as well as political and
operational risks and governmental regulation and judicial outcomes. Victory
undertakes no obligation to release publicly any revisions to any “forward-looking”
statement.
Page 9 of 35
Competent Person Statement - Professor Ken Collerson
Statements contained in this report relating to exploration results, metallurgy
results, scientific evaluation, and potential, are based on information compiled and
evaluated by Emeritus Professor Ken Collerson. Professor Collerson (PhD) Principal
of KDC Geo Consulting and Director of Victory Metals Limited, and a Fellow of the
Australasian Institute of Mining and Metallurgy (AusIMM No. 100125), is a
geochemist/geologist with sufficient relevant experience in relation to rare earth
element and critical metal mineralisation being reported on, to qualify as a
Competent Person as defined in the Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves (JORC Code 2012). Professor Collerson
consents to the use of this information in this report in the form and context in
which it appears.
Page 10 of 35
Table 1 — Feed sample assay results (ppm)
HoleID Sample From To La₂O₃ CeO₂ Pr₆O₁₁ Nd₂O₃ Sm₂O₃ Eu₂O₃ Gd₂O₃ Tb₄O₇ Dy₂O₃ Ho₂O₃ Er₂O₃ Tm₂O₃ Yb₂O₃ Lu₂O₃ Y₂O₃ TREO
HREO:TR
EO
25NSTWAC01 341297 33 34 225 71 54 233 49 6 49 6 31 6 17 2 13 2 222 986 0.36
25NSTWAC01 341311 47 48 92 196 23 97 23 2 24 4 26 6 18 3 18 3 177 713 0.40
25NSTWAC07 340644 57 58 178 66 43 180 40 10 39 7 40 8 23 4 24 4 177 843 0.40
25NSTWAC08 340707 35 36 128 71 32 118 32 9 49 10 65 14 44 6 37 5 494 1113 0.66
25NSTWAC08 340711 39 40 22 25 5 26 11 4 25 5 37 9 30 4 23 4 414 643 0.86
25NSTWAC12 341473 23 24 252 163 57 243 57 9 64 9 52 10 29 4 23 4 335 1310 0.41
IF019 330346 20 21 323 286 83 334 69 20 69 10 55 11 31 4 28 4 367 1695 0.35
IF019 330347 21 22 210 178 56 232 51 15 50 7 38 7 19 3 16 2 218 1103 0.34
IF019 330348 22 23 95 79 26 108 23 8 27 4 25 5 15 2 14 2 167 601 0.45
IF019 330349 23 24 266 303 68 307 78 25 109 18 128 28 89 12 77 13 942 2464 0.58
IF034 329618 52 53 178 526 52 250 59 12 70 12 76 17 52 8 51 8 585 1957 0.46
IF034 329619 53 54 70 168 17 73 17 3 22 4 26 6 18 3 16 3 213 660 0.48
IF036 329451 43 44 157 114 39 151 35 11 48 8 65 16 54 8 52 8 575 1340 0.63
IF036 329452 44 45 564 646 138 574 128 37 155 23 151 34 102 13 81 11 1218 3874 0.47
IF128 325663 21 22 84 311 24 104 23 7 23 4 26 6 16 2 16 3 135 783 0.30
IF144 328165 23 24 119 238 30 115 27 5 27 5 31 6 20 3 18 3 189 832 0.37
IF144 328166 24 25 87 175 22 85 22 4 24 4 27 6 17 2 17 2 173 666 0.41
IF144 328171 29 30 97 177 23 95 22 4 19 3 20 4 12 2 11 2 126 618 0.33
IF149 328424 17 18 78 230 27 125 34 11 48 8 55 12 34 5 32 5 405 1108 0.55
IF149 328426 19 20 75 95 20 90 24 7 41 7 50 12 38 6 38 6 465 973 0.69
IF150 328472 17 18 110 220 29 109 26 3 27 4 24 5 17 2 16 2 176 770 0.36
IF151 328496 14 15 86 92 23 96 28 12 45 8 53 13 41 6 38 6 396 941 0.66
IF153 328628 45 46 109 42 27 111 24 7 27 5 30 7 20 3 20 3 179 616 0.49
IF153 328635 52 53 95 24 14 64 17 6 40 7 51 12 39 5 30 5 700 1111 0.81
IF153 328639 56 57 28 82 8 38 14 4 21 4 35 8 29 4 27 4 364 670 0.75
IF159 328995 48 49 75 52 23 103 34 11 66 14 106 26 85 13 79 13 1027 1727 0.83
IF159 328996 49 50 130 51 29 121 24 7 28 4 26 5 14 2 14 2 159 617 0.42
IF180 317345 18 19 174 356 42 164 38 6 35 6 37 8 23 4 24 4 231 1151 0.33
IF180 317346 19 20 132 262 34 125 29 5 23 4 25 5 16 3 17 3 160 842 0.31
IF180 317347 20 21 130 247 33 123 29 6 26 5 32 7 21 3 21 3 218 902 0.38
IF180 317348 21 22 89 176 22 84 20 4 18 3 21 4 13 2 14 2 135 607 0.36
IF180 317350 23 24 109 239 27 103 26 5 24 4 25 5 16 2 16 2 150 754 0.33
IF180 317351 24 25 147 269 36 142 33 7 31 5 31 6 17 3 18 3 174 922 0.32
IF180 317354 27 28 108 154 25 101 25 5 24 4 26 6 16 2 16 2 171 685 0.40
IF180 317355 28 29 106 200 27 112 27 5 32 6 36 8 25 3 23 3 246 860 0.45
IF182 317249 22 23 64 271 16 60 15 5 19 4 26 6 22 3 24 4 244 784 0.46
Page 11 of 35
HoleID Sample From To La₂O₃ CeO₂ Pr₆O₁₁ Nd₂O₃ Sm₂O₃ Eu₂O₃ Gd₂O₃ Tb₄O₇ Dy₂O₃ Ho₂O₃ Er₂O₃ Tm₂O₃ Yb₂O₃ Lu₂O₃ Y₂O₃ TREO
HREO:TR
EO
IF182 317250 23 24 47 238 13 52 13 4 17 3 22 5 19 3 20 4 204 665 0.45
IF182 317251 24 25 99 214 22 85 18 5 19 3 21 5 16 2 16 3 166 692 0.37
IF184 317135 45 46 246 94 64 243 56 17 51 9 48 9 24 3 23 3 217 1106 0.36
IF188 316885 30 31 259 105 49 177 40 11 41 6 38 7 20 3 18 3 197 973 0.35
IF190 316735 17 18 164 295 45 171 37 8 31 5 29 6 18 3 19 3 182 1014 0.30
IF190 316736 18 19 361 661 79 313 64 14 73 12 76 16 49 7 45 7 522 2299 0.36
IF190 316737 19 20 170 442 34 139 31 8 46 8 59 13 44 6 38 6 477 1522 0.46
IF193 316610 27 28 124 193 27 102 22 5 21 3 22 5 14 2 14 2 127 682 0.31
IF193 316611 28 29 249 324 47 186 40 12 60 10 73 17 53 8 50 8 617 1753 0.52
IF196 316433 24 25 45 361 13 55 15 4 18 4 28 6 21 3 21 3 203 800 0.39
IF197 316307 27 28 386 720 109 449 91 20 77 12 67 13 35 5 34 5 325 2348 0.25
IF197 316308 28 29 298 146 79 336 73 18 84 15 89 19 54 8 47 7 571 1843 0.49
IF198 316171 31 32 427 556 119 456 87 21 79 13 83 18 54 8 54 8 593 2576 0.36
IF198 316172 32 33 347 226 83 349 75 19 78 11 67 13 36 5 32 5 366 1711 0.37
IF198 316174 34 35 265 412 74 295 61 15 55 9 52 10 29 4 27 4 286 1595 0.31
IF198 316175 35 36 314 405 83 339 69 16 66 10 58 11 33 5 30 4 330 1774 0.32
IF198 316176 36 37 202 238 53 211 42 10 42 7 43 9 27 4 24 4 277 1193 0.37
IF198 316177 37 38 108 86 25 99 20 5 23 4 22 5 15 2 13 2 179 607 0.45
IF200 316084 23 24 116 353 25 93 23 6 27 5 32 7 19 3 19 3 185 913 0.33
IF200 316085 24 25 114 146 22 84 20 5 22 3 23 5 15 2 14 2 159 637 0.39
IF208 317999 40 41 117 1165 45 185 52 13 53 12 84 18 55 8 63 8 432 2311 0.32
IF208 318000 41 42 549 844 169 701 163 40 161 27 174 36 114 16 114 15 909 4031 0.40
IF208 318001 42 43 590 83 132 594 156 46 256 42 265 58 173 22 138 20 1911 4485 0.65
IF208 318002 43 44 267 53 71 328 102 31 174 31 201 45 139 17 104 14 1384 2961 0.72
IF208 318003 44 45 263 36 45 189 40 11 60 9 60 13 42 5 34 5 470 1283 0.55
IF208 318005 46 47 135 122 31 125 30 8 40 7 43 10 29 4 24 4 364 978 0.55
IF208 318006 47 48 95 174 27 106 27 6 29 6 38 9 27 4 27 4 301 880 0.51
IF208 318009 50 51 92 105 25 102 24 6 26 4 24 5 14 2 13 2 157 601 0.42
IF208 318010 51 52 215 189 45 192 46 14 63 9 58 13 37 5 31 5 505 1426 0.52
Page 12 of 35
Table 2 — Feed sample drill hole collar locations
HoleID Easting (mE) Northing (mN) RL (m) No. samples Sampled interval (m)
25NSTWAC01 586462 6973695 396 2 33–48
25NSTWAC07 589400 6975135 371 1 57–58
25NSTWAC08 587699 6974671 393 2 35–40
25NSTWAC12 586294 6973310 408 1 23–24
IF019 588198 6975138 408 4 20–24
IF034 589700 6975134 376 2 52–54
IF036 589898 6975130 385 2 43–45
IF128 589189 6973716 412 1 21–22
IF144 586112 6973316 407 3 23–30
IF149 586597 6973309 414 2 17–20
IF150 586695 6973312 414 1 17–18
IF151 586815 6973313 417 1 14–15
IF153 587014 6973318 386 3 45–57
IF159 587601 6973313 384 2 48–50
IF180 586377 6972910 414 8 18–29
IF182 586602 6972908 410 3 22–25
IF184 586786 6972917 387 1 45–46
IF188 587201 6972925 403 1 30–31
IF190 588596 6972910 418 3 17–20
IF193 588910 6972924 408 2 27–29
IF196 589204 6972903 411 1 24–25
IF197 589301 6972907 408 2 27–29
IF198 589397 6972907 404 6 31–38
IF200 589600 6972906 412 2 23–25
IF208 589102 6975130 388 9 40–52
Notes: Coordinates in metres, MGA Zone 50. RL is topographic surface elevation (m). TREO = total rare earth oxides (including yttrium); HREO = heavy rare earth oxides. Assays are
reported on individual one metre samples.
Page 13 of 35
Page 14 of 35
APPENDIX 1: 2012 JORC CODE
Table 1: JORC Code
Section 1: Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling
(e.g. cut channels, random
chips, or specific specialised
industry standard
measurement tools appropriate
to the minerals under
investigation, such as downhole
gamma sondes, or handheld
XRF instruments, etc.). These
examples should not be taken
as limiting the broad meaning
of sampling.
• Include reference to measures
taken to ensure sample
representivity and the
appropriate calibration of any
measurement tools or systems
used.
• Aspects of the determination of
mineralisation that are Material
to the Public Report. In cases
where ‘industry standard’ work
has been done this would be
relatively simple (e.g. ‘reverse
circulation drilling was used to
obtain 1 m samples from which
3 kg was pulverised to produce
a 30 g charge for fire assay’). In
other cases, more explanation
may be required, such as where
there is coarse gold that has
inherent sampling problems.
Unusual commodities or
mineralisation types (e.g.
• (AC) Air core drillholes were drilled vertically and spaced 100m apart along 200m - 400m spaced
drill lines.
• (AC) drilling samples were collected as 1-m samples from the rig cyclone. Each sample was placed
into large green drill bags (900mmx600mm) for temporary storage onsite.
• Each sample was then split using a 3-tier (87.5% - 12.5%) splitter and the split sample was placed
into calico sample bags for transport to Perth.
• Sample weights and recoveries were recorded on site and weighed 1.5 - 2.5 kg depending on the
sample recovery from the drill hole. The mean bulk sample weight was 8.45kg.
• A commercial transport company was used to transport the bags to the Victory warehouse in
Perth.
• A handheld pXRF analyzer (Olympus Vanta) was used to determine anomalous REO (Rare earth
element) geochemistry (La, Ce, Pr, Nd and Y) from the 1-m sample piles. pXRF reading times were
45 secs over 3 cycles for multielement and REO assays. These results are not considered
dependable without calibration using chemical analysis from an accredited laboratory. However,
their integrity was checked using Certified REO -bearing geochemical standards.
• The handheld pXRF is used as a guide to the relative presence or absence of certain elements,
including REOs vectors (La, Ce, Pr, Nd and Y) to help direct the sampling program. Anomalous 1m
samples were then transported to the assay lab for analysis by Victory personnel. REO anomalism
thresholds are determined by VTM technical lead based on historical data analysis. Currently the
anomaly threshold is plus 30ppm Yttrium.
• Victory attended North Stanmore to collect the green sample bag which was transported by
Victory to Victory’s secure warehouse in Perth.
• Measures taken to ensure sample representivity included regular cleaning of the rig between drill
holes using compressed air and weighing the bulk sample to ensure reasonable sample return
against an expected target weight.
• RC drill samples were collected as 1-m samples from the rig cyclone and placed on top of black
plastic, which was laid on the natural ground surface to prevent contamination, in separate piles
and in orderly rows. A hand-held trowel was used to collect 4-m composite samples from the 1-m
piles. Compositing did not account for lithology changes. These composite samples weighed
between 2 and 3 kg.
Page 15 of 35
Criteria JORC Code explanation Commentary
submarine nodules) may
warrant disclosure of detailed
information
Drilling
techniques
• Drill type (e.g. core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core
diameter, triple or standard
tube, depth of diamond tails,
face-sampling bit or other type,
whether core is oriented and if
so, by what method, etc.).
• (AC) drilling uses a three bladed steel or tungsten drill bit to penetrate the weathered layer of
loose soil and rock fragments. The drill rods are hollow and have an inner tube with an outer
barrel (similar to RC drilling).
• (AC) drilling uses small compressors (750 cfm/250 psi) to drill holes into the weathered layer of
loose soil and fragments of rock.
• (RC) Drilling used a 5½” face sampling hammer with 1,350cfm/500 psi onboard compressor,
which was occasionally supplemented with an additional booster (2,100cfm/1,000 psi).
• After drilling is complete, an injection of compressed air is unleashed into the space between the
inner tube and the drill rods inside wall, which flushes the cuttings up and out of the drill hole
through the rod’s inner tube, resulting in less chance of cross-contamination.
• (AC) Drilling was conducted by Bostech Drilling for the 63 drillhole programme.
• The drill rigs were inspected daily by VTM personnel for safety and rig hygiene
Drill sample
recovery
• Method of recording and
assessing core and chip sample
recoveries and results assessed.
• Measures taken to maximise
sample recovery and ensure
representative nature of the
samples.
• Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
• The majority of samples were dry, where excessive water flows were encountered during drilling
the sample recovery was variable. The depth that water was encountered was recorded in the
database.
• Representative percussion drillhole samples were collected as 1-metre intervals, with
corresponding chips placed into chip trays and kept for reference at VTM’s facilities.
• Measures taken to ensure sample representivity and recovery included regular cleaning of the rig
between drill holes using compressed air and weighing the bulk sample to ensure reasonable
sample return against an expected target weight.
Logging
• Whether core and chip samples
have been geologically and
geotechnically logged to a level
of detail to support appropriate
Mineral Resource estimation,
mining studies and
metallurgical studies.
• All percussion samples in the chip trays were lithologically logged using standard industry
logging software on a notebook computer.
• All (AC) samples have been logged for lithology, alteration, quartz veins, colour, fabrics.
• All (AC) samples have been analysed by a handheld pXRF.
• All samples were subjected to a NIR spectrometer for the identification of minerals and the
variations in mineral chemistry to detect alteration assemblages and regolith profiles.
• All geological information noted above has been reviewed by a competent person as recognised
by JORC.
• Whether logging is qualitative
or quantitative in nature. Core
(or costean, channel, etc.)
photography.
• Logging is qualitative in nature.
• (AC) samples have been photographed.
Page 16 of 35
Criteria JORC Code explanation Commentary
• The total length and
percentage of the relevant
intersections logged.
• 90% of the sample intervals were logged.
Subsampling
techniques and
sample
preparation
• If core, whether cut or sawn and
whether quarter, half or all core
taken.
• Diamond drilling was PQ core.
• Half core samples were taken, with the exception of when twin samples were collected and then
the samples were quarter core.
• If non-core, whether riffled, tube
sampled, rotary split, etc. and
whether sampled wet or dry.
• Air core and RC sampling was undertaken on 1m intervals using a Meztke Static Cone splitter.
• Samples from the cyclone were placed into green drill bags and were laid out in orderly rows on
the ground.
• Using a hand-held trowel, 1m samples were collected from the one-metre drill bags after splitting
of the sample.
• These samples were placed into calico bags and weighed between 1.5 and 2.5 kgs.
• For all sample types, the nature,
quality and appropriateness of
the sample preparation
technique.
• Samples were assayed by ALS Laboratories in Perth, a NATA Accredited Testing Laboratory. The
assay methods used include:
o ME-4ACD81: Four acid digestion followed by ICP-AES measurement
o ME-MS81: Lithium borate fusion followed by acid dissolution and ICPMS measurement
o ME-ICP06: Fusion decomposition followed by ICP-OES measurement
• REOs were all analysed by ME-MS81 (four acid digestion followed by ICPMS measurement) with
results returned in their elemental form. Elements were then converted to oxides using the
appropriate stoichiometric conversion factors.
• Base metals are assayed by ME-ICP06: Fusion decomposition.
• Non-ferrous metals are assayed by ME-4ACD81: Four acid digestion.
• Quality control procedures
adopted for all subsampling
stages to maximise
representivity of samples.
• Using a riffle splitter, 1m composite samples were collected from the individual sample bags.
• Quality control of the assaying comprised the collection of a bulk repeat sample every hole, along
with the regular insertion of industry (OREAS) standards (certified reference material) every 20
samples and blanks (beach sand) every 50 samples. The repeat sample was collected by passing
the bulk reject obtained from the first split stage through the riffle splitter once more. The repeat
sample is not a duplicate.
• Measures taken to ensure that
the sampling is representative
of the in-situ material collected,
including for instance results for
field duplicate/second-half
sampling.
• Fourteen twin samples of quarter core (diamond PQ) were compared to the original
Share your feedback
Discover